Water hammer
Contents |
[edit] Introduction
Collins Complete Do-It-Yourself Manual was published in 1986. It was created for William Collins Sons & Co. Ltd. by Jackson Day and conceived by Jackson Day Jennings Ltd.
It defines the term water hammer as “a vibration in plumbing pipework produced by fluctuating water pressure.”
Water hammer is also known as fluid hammer or hydraulic shock.
[edit] History
One of the earliest recorded mentions of water hammer was in the 1st century BC. The occurrence is described by Vitruvius Pollio (born c. 80–70 BC, died after c. 15 BC) - often considered the first recognisable architect and known as a great Roman writer, engineer and builder. Amongst his accomplishments, Vitruvius documented the phenomenon - and proposed a resolution through the construction of cavities known as ‘venters’ - in his description of the pipes and tubes of the Roman public water supply.
The action created by water hammers was used in the development of a device known as a pulsation engine. Constructed in 1772 by the English clockmaker and scientist, John Whitehurst, the pulsation engine was the precursor to the hydraulic ram, or hydram, which used hydropower to pump water.
The hydraulic ram and the action of water hammers was used in 1796 by the French inventor Joseph Michel Montgolfier (1740–1810). Perhaps better known as the inventor of the Montgolfière-style hot air balloon (along with his brother, Jacques-Étienne Montgolfier), Montgolfier explored the idea of the pulsation engine and improved upon it to create the first self-acting ram pump. The Mongolfiers harnessed the ram pump to run their paper mill and refine a process to manufacture transparent paper.
It wasn’t until 1898 that the idea of water hammers was more formally explored in relation to civil engineering - first by the Russian, Nikolay Yegorovich Zhukovsky and the American, Joseph Palmer Frizell. In 1902, it was investigated again by the Italian engineer Lorenzo Allievi.
[edit] Causes
In certain situations, water hammers can be created when the flow of water is cut off from an appliance (such as a washing machine or dishwasher) or fixture (such as a toilet or shower). When the water flow resumes, it may be accompanied by a loud noise sometimes accompanied by a shudder - which may repeat several times or may happen just once. These actions indicate the transmission of a shock wave that travels back and forth.
Water hammers occur most frequently in older pipes. The shock wave associated with them may trigger the release of high pressure steam which can be dangerous - or even deadly. Their release can also create property damage if they rupture or cause pipes to collapse.
[edit] Preventing water hammers
It is sometimes possible to fix water hammers in a home without having to call in a professional plumber. The simplest method is to secure loose pipes, but if this doesn’t resolve the issue, additional methods - which may require a greater level of skill - can be attempted. These include:
- Installing an air chamber.
- Installing mechanical water shock arrestors or a hydropneumatic device known as a water hammer arrestor.
- Installing a water pressure regulator.
- Lowering fluid velocities.
- Fitting slowly closing, quiet valves or installing non-slam check valves.
[edit] Related articles on Designing Buildings
Featured articles and news
OpenUSD possibilities: Look before you leap
Being ready for the OpenUSD solutions set to transform architecture and design.
Global Asbestos Awareness Week 2025
Highlighting the continuing threat to trades persons.
The context, schemes, standards, roles and relevance of the Building Safety Act.
Retrofit 25 – What's Stopping Us?
Exhibition Opens at The Building Centre.
Types of work to existing buildings
A simple circular economy wiki breakdown with further links.
A threat to the creativity that makes London special.
How can digital twins boost profitability within construction?
The smart construction dashboard, as-built data and site changes forming an accurate digital twin.
Unlocking surplus public defence land and more to speed up the delivery of housing.
The Planning and Infrastructure Bill
An outline of the bill with a mix of reactions on potential impacts from IHBC, CIEEM, CIC, ACE and EIC.
Farnborough College Unveils its Half-house for Sustainable Construction Training.
Spring Statement 2025 with reactions from industry
Confirming previously announced funding, and welfare changes amid adjusted growth forecast.
Scottish Government responds to Grenfell report
As fund for unsafe cladding assessments is launched.
CLC and BSR process map for HRB approvals
One of the initial outputs of their weekly BSR meetings.
Architects Academy at an insulation manufacturing facility
Programme of technical engagement for aspiring designers.
Building Safety Levy technical consultation response
Details of the planned levy now due in 2026.
Great British Energy install solar on school and NHS sites
200 schools and 200 NHS sites to get solar systems, as first project of the newly formed government initiative.
600 million for 60,000 more skilled construction workers
Announced by Treasury ahead of the Spring Statement.
The restoration of the novelist’s birthplace in Eastwood.
Life Critical Fire Safety External Wall System LCFS EWS
Breaking down what is meant by this now often used term.
PAC report on the Remediation of Dangerous Cladding
Recommendations on workforce, transparency, support, insurance, funding, fraud and mismanagement.
New towns, expanded settlements and housing delivery
Modular inquiry asks if new towns and expanded settlements are an effective means of delivering housing.